ASX-200 12V/50A Tri-Certified Flameproof Alternators
The ASX-200 12VDC/50Amp Flameproof Alternator is an externally excited alternator designed for use in belt driven, diesel engine applications. The ASX-200 is tri-certified for use in hazardous areas classified as ATEX/IECEx Zones 1 or 2, NEC 500 Division 2 and NEC 505 Zone 2. It is suitable for ambient temperature range -30°C to +55°C.
Features and Benefits
- Compact high performance design
- Certified for hazardous areas classified as ATEX/IECEx Zones 1 or 2, NEC 500 Division 2 and NEC 505 Zone 2
- Speed signal output for overspeed shutdown
- Side (ASX-200) and rear (ASX-201) cable entry options
- Certified cable gland included
- Wide choice of optional pulleys
- Suitable for offshore conditions
Application
Designed as belt driven diesel engine mounted alternator for use in hazardous areas classified as ATEX/IECEx Zones 1 or 2. Suitable for a local ambient temperature range between -30°C and +55°C. Speed signal output available. Power output suitable for charging a medium sized diesel engine start battery, subject to the following limitation:
- The output demand not to exceed 50 amps
- This equipment must not be used for other applications without prior approval of Chalwyn
Operation
The ASX-200 Flameproof Alternator is designed to be a direct replacement for non-flameproof alternators used on diesel engines. Some adjustments to mounting brackets and belt tensioning link may be necessary. The alternator rear cover can be rotated to provide alternate cable entry positions.
In the case of fixed speed applications the pulley drive should be arranged to give a continuous alternator speed of between 5,000 rpm and 7,000 rpm. In the case of variable speed applications the pulley ratio should be selected to give an alternator speed of 2,000 to 2,500 rpm at the engine low idle. This typically equates to a normal operating alternator speed range of about 3,500 rpm to 8,000 rpm.
The maximum output demand for the ASX-200 alternator should not exceed 50 amps.
