PROFOX PF-M

One solution for butterfly, ball/plug and globe valves. Compact actuators with intelligent functions as platform concept for tailored automation solutions.

PROFOX PF-Q

One solution for butterfly, ball/plug and globe valves. Compact actuators with intelligent functions as platform concept for tailored automation solutions.

Explosion-proof actuators PROFOX PF-MX

Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as ignition source.

Explosion-proof actuators PROFOX PF-QX

Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur.

Actuators SQ and SQR

Actuators of the SQ type range for open-close duty and positioning duty are rated for class A and B or types of duty S2 - 15 min.

Actuators SA and SAR

Actuators of the SA type range for open-close duty and positioning duty are rated for class A and B or types of duty S2 - 15 min. A special version for longer running is available for the S2 - 30 min duty.

Variable operating time actuators SQV and SQRV

With SQV .2 part-turn actuators for open-close duty and SQRV .2 for modulating duty paired with ACV .2 actuator controls, the proven AUMA SQ/SQR range is enhanced by variable operating time models.

Explosion-proof actuators SQEx and SQREx

Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as ignition source.

SAEx and SAREx

Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as ignition source.

Explosion-proof variable speed actuators SAVEx and SARVEx

Multi-turn actuators SAVEx .2 for open-close duty and SARVEx .2 for modulating duty are paired with intelligent ACVExC 01.2 actuator controls. The proven AUMA SAEx/SAREx range is enhanced by variable speed models.

Variable speed actuators SAV and SARV

With SAV .2 multi-turn actuators for open-close duty and SARV .2 for modulating duty paired with ACV .2 actuator controls, the proven AUMA SA/SAR range is enhanced by variable speed models. AUMA is spearheading market technology offering a wide speed control ratio of 1:10.

Actuators SA-UW and SAR-UW

A sophisticated sealing system combined with excellent corrosion protection properties qualify AUMA actuators for underwater use.

Variable operating time actuators SQVEx and SQRVEx

With SQVEx .2 part-turn actuators for open-close duty and SQRVEx .2 for modulating duty paired with ACVExC .2 actuator controls, the proven AUMA SQ/SQR range is enhanced by variable operating time models.

FQM and FQMEx fail safe unit

With their new FQM fail safe unit, AUMA offer innovative and safe actuator solutions for automatic operation of valves in case of emergencies making use of stored mechanical energy. Constant torque curve with torques from 150 Nm to 1,200°Nm

TIGRON TR-M

The TIGRON is a multi-turn actuator with classic mission: Automation of gate valves with or without rising stem as well as double block and bleed valves.

Variable speed actuator SEVEN

Use of a specially developed frequency converter offers tremendous advantages. The most important features are variability in speed, resistance against voltage and frequency fluctuations, no current peaks during start-up as well as gentle operation of the valve by reducing speed in end positions.

Combinations with spur gearboxes

If the drive shaft is to be positioned at a certain angle to the output drive shaft, combinations of the multi-turn actuators SA with AUMA spur gearboxes GST are used. The output torque can be increased many times.

Combinations with multi-turn gearboxes

With the SA 07.2 – SA 48.1 multi-turn actuators, AUMA covers a torque range of up to 32,000 Nm. Torques up to 120,000 Nm can be achieved by combining an AUMA multi-turn actuator with the GHT multi-turn gearbox.

Combinations with part-turn gearboxes

By combining the multi-turn actuators SA with the part-turn gearboxes GS, they are turned into electric part-turn actuators for higher torque requirements. These combinations supplement the part-turn actuator ranges SQ whose torque ranges are limited to 2,400 Nm.

Combinations with linear thrust units

To perfom linear movements, e. g. in case of globe valves, the multi-turn actuator SA can be combined with the linear thrust unit LE. In case a lever arrangement has to be operated, the linear thrust unit can be mounted on a base.

Combinations with bevel gearboxes

If the drive shaft is to be displaced by 90°, combinations of the multi-turn actuators SA with AUMA bevel gearboxes GK are used. The output torque can be increased many times.

Actuators SVC and SVCR

The "small" electric globe valve actuator range with integral controls. All parameters are directly set at the actuator. The controls contain switchgears, power supply unit, interface to the DCS.

Actuators SV with MEC

Actuators SVM and SVMR

Actuators with base and lever

The lever actuators are based on the well-established part-turn actuator SQ and therefore have the same characteristics.

Actuators SGC and SGCR

The "small" electric part-turn actuator range with integral controls.

Actuators SG with MEC

The "small" electric part-turn actuator range with separate MEC controls.

Actuators SGM and SGMR

The "small" electric part-turn actuator range with integral controls.

Actuator SDL/SDG

Electronic actuators with variable speed control. Electronic setting of torque and stroke with function monitoring. Power supply unit with wide range Input. Actuator applications for demanding control automation tasks in industrial environments with potentially explosive atmospheres.